Adapters for Automated Programmers
6th Gen | 7th Gen |
FASM32TQI | FASM32TQI |
Adapters for Manual Programmers
6th Gen | 7th Gen |
FSM32TQI, FASM32TQI | FSM32TQI, FASM32TQI |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM32TQI, FASM32TQI | FSM32TQI, FASM32TQI |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | Microcontroller |
Device Size: | 16KByte |
Algorithm Programming method: | Monitor mode + Custom bootloader |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
Main Flash Area | R/W/E | Yes | BC00 – FBFF | BC00 – FBFF |
Flash Block Protect Register | R/W/E | Yes | FFCF – FFCF | FFCF – FFCF |
Mask Option Register | R/W/E | Yes | FFD0 – FFD0 | FFD0 – FFD0 |
User Flash Vectors | R/W/E | Yes | FFDC – FFFF | FFDC – FFFF |
Default Algorithm Range | — | — | 0000 – FFFF | 0000 – FFFF |
* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
1. | This device has an eight bytes security feature from $FFF6 to $FFFD. | |
2. | To read a programmed device with the security feature the buffer or Device/Config must be filled with correct data from address $FFF6 to $FFFD.Incorrect data at these locations will prevent access to the device. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Freescale Semiconductor |
---|---|
Packages | QFP(32) |
Part Number | MC68HC908JL16CFJE |
Vcc(program) | 5 |
Package | |
8-bit Bytes |