Freescale Semiconductor MC908GT16CB DIP(42) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM42SDA | FSM42SDA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM42SDA | FSM42SDA |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH.The following describes the buffer setup:The addresses $C000 to $FDFF are FLASH .The address $FF7E is FLASH Block Protect Register.The addresses $FFDC to $FFFF are Flash Vectors.This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the buffer or Device/Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device.Erasing the device will erase the clock trim valuesstored at locations $FF80 and $FF81. If these values need to be saved on blank devicesfrom the factory disable Erase before Program.This algorithm does not program the clock trim registers. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(42) |
| Part Number | MC908GT16CB |
| Vcc(program) | 5 |
| 8-bit Bytes | |
| Package |