+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Freescale Semiconductor MC9S08AW60CPUE QFP(64) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: The following describes the Buffer setup:Addresses $0870-$17FF are FLASH.Addresses $1860-$FFFF are FLASH.There are some location reserved in the FLASH memory map.The following are reserved addresses: $FFB8-$FFBB $FFBC and $FFBE.These locations will be ignored during Program Read and Verify.Erase command will be erase entire FLASH memory map included reserved memory.*** During Erase factory programmed trim value at addresses $FFBC and $FFBE will besaved first and restored at the end. Erase will fail if the device is secured.If the device fails erase the Factory Trim value might be corrupted.The part cannot be used unless re-trimmed.The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00).They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare.To secure the device use SECURE command.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Freescale Semiconductor

Packages

QFP(64)

Part Number

MC9S08AW60CPUE

Vcc(program)

5

8-bit Bytes
Package