Freescale Semiconductor MC9S08DV16AVLF LQFP(48) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASMR48TQZ	FX4ASMR48TQZ, FASMR48TQZ

Adapters for Manual Programmers

6th Gen	7th Gen
FSMR48TQZ, FASMR48TQZ	FX4SMR48TQZ, FSMR48TQZ, FX4ASMR48TQZ, FASMR48TQZ, LX4ASMR48TQZ (repl.)

Adapters for Engineering Programmers

6th Gen	7th Gen
FSMR48TQZ, FASMR48TQZ	FX4SMR48TQZ, FSMR48TQZ, FX4ASMR48TQZ, FASMR48TQZ, LX4ASMR48TQZ (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated.

Device Type:	MCU
Device Size:	16KB Flash

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_BE00 – 0000_FFFF	0000_BE00 – 0000_FFFF

Default Algorithm Range	—	—	0000_BE00 – 0000_FFFF	0000_BE00 – 0000_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Special Device Considerations:

There are some locations reserved in the FLASH memory map. The following are reserved addresses: $FFB8-$FFBC and $FFBE. These locations will be ignored during Program Read and Verify.Erase command will erase entire FLASH memory map included reserved memory.*** During Erase factory programmed trim value at address $FFAE(FTRIM) and $FFAF(MCGTRM) will be saved first and restored at the end. Erase will fail if the device is secured. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00). They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare. To secure the device use SECURE command.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Freescale Semiconductor
Packages	LQFP(48)
Part Number	MC9S08DV16AVLF
Vcc(program)	3.6
8-bit Bytes
Package