Freescale Semiconductor MC9S08RD60PE DIP(28) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48DR | FSM48DR |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48DR | FSM48DR |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the Buffer setup:Addresses $0846-$17FF are FLASH.Addresses $182C-$FFFF are FLASH.Address $FFBD is NVPROT register.Address $FFBF is NVOPT register.There are two security bits(SEC01:SEC00) at bit 1 and bit 0 of the NVOPT register.The unsecured state of the two bits are (1:0).There are some locations reserved in the FLASH memory map.The following are reserved addresses: $FFB8-$FFBC and $FFBE.These locations will be ignored during Program Read and Verify operations.Erase command will erase entire FLASH memory including the reserved addresses.To secure the device use Secure command.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | DIP(28) |
| Part Number | MC9S08RD60PE |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |