Freescale Semiconductor MC9S08SG16MTG TSSOP(16) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR16TN, FASMR28TSE, FASMR28TS, FASM28TS | FX4ASMR16TN, FASMR16TN, FX4ASMR28TSE, FASMR28TSE, FASMR28TS, FASM28TS, LX4ASMR16TN (repl.), LX4ASMR28TSE (repl.) | LX4ASMR16TN, LX4ASMR28TSE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR16TN, FSMR28TSE, FSMR28TS, FSM28TS, FASMR16TN, FASMR28TSE, FASMR28TS, FASM28TS | FX4SMR16TN, FSMR16TN, FX4SMR28TSE, FSMR28TSE, FSMR28TS, FSM28TS, FX4ASMR16TN, FASMR16TN, FX4ASMR28TSE, FASMR28TSE, FASMR28TS, FASM28TS, LX4ASMR16TN (repl.), LX4ASMR28TSE (repl.) | LX4ASMR16TN, LX4ASMR28TSE |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR16TN, FSMR28TSE, FSMR28TS, FSM28TS, FASMR16TN, FASMR28TSE, FASMR28TS, FASM28TS | FX4SMR16TN, FSMR16TN, FX4SMR28TSE, FSMR28TSE, FSMR28TS, FSM28TS, FX4ASMR16TN, FASMR16TN, FX4ASMR28TSE, FASMR28TSE, FASMR28TS, FASM28TS, LX4ASMR16TN (repl.), LX4ASMR28TSE (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 16 Kbytes |
| Algorithm Programming Method: | Custom bootloader |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| [Flash] | [R/W/E] | [Yes] | [C000-FFA7] | [C000-FFA7] |
| [NVTRIM] | [R] | [Yes] | [FFA8-FFAF] | [FFA8-FFAF] |
| [Nonvolatile FLASH registers] | [R/W/E] | [Yes/No] | [FFB0-FFBF] | [FFB0-FFBF] |
| [Reset/Interrupt Vectors] | [R/W/E] | [Yes/No] | [FFC0-FFFF] | [FFC0-FFFF] |
| Default Algorithm Range | — | — | [C000-FFFF] | [C000-FFFF] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Serialization Supported: | Yes |
| 2. | [Secure/Lock Erasable]: | No |
| 3. | [Special file format required]: | No |
| 4. | Erase command will erase entire FLASH memory map including the reserved memory.During Erase the algorithm will save and restore the clock trim values stored at | |
| location $FFAE(FTRIM)$FFAF(ICSTRIM).. | ||
| 6. | If Erase fails the Factory Trim value might be corrupted and the part cannot be used unless re-trimmed. This algorithm does not re-trim $FFAE(FTRIM)and $FFAF(ICSTRIM). These locations will be ignored during Program and Verify. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | TSSOP(16) |
| Part Number | MC9S08SG16MTG |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |