Freescale Semiconductor MC9S12UF32PBE LQFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM64QMG | FASM64QMG |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM64QMG, FASM64QMG, WASM64QMG (repl.) | FSM64QMG, FASM64QMG, WASM64QMG (repl.) | WASM64QMG |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64QMG, FASM64QMG, WASM64QMG (repl.) | FSM64QMG, FASM64QMG, WASM64QMG (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the buffer setup:Addresses $F8000-$FBFFF are FLASH PAGE $3E.Addresses $FC000-$FFFFF are FLASH PAGE $3F.There are two security bits in the FLASH PAGE $3F.These bits (SEC01 SEC00) are Bit1 and Bit0 of address $FFF0F in the buffer.These locations will be masked out during programming and these bitswill be programmed to 0′ when the device is secured. To secure the deviceset the Secure options or use SECURE command.For MC9S12UF32 (Mask Set 1L47S):When security is enabled security cannot be disabled using the BDMmass erase/security byte reprogram sequence. A bug causes the blankcheck to fail and as a result the FLASH security byte cannot bereprogrammed to the unsecure state. Device will not erase anymore.Please set Device option ‘Byte order’ to ‘MSB=0LSB=1 (Big Endian)’. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | LQFP(64) |
| Part Number | MC9S12UF32PBE |
| Vcc(program) | 5 |
| Package |