Freescale Semiconductor MC9S12XD128VAA(Global map) QFP(112) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM112TQK, WASM112TQK (repl.) | FASM112TQK, WASM112TQK (repl.) | WASM112TQK |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM112TQK, FASM112TQK, WASM112TQK (repl.) | FSM112TQK, FASM112TQK, WASM112TQK (repl.) | WASM112TQK |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM112TQK, FASM112TQK, WASM112TQK (repl.) | FSM112TQK, FASM112TQK, WASM112TQK (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the Data Pattern setup: Addresses [$13F800 – $13FBFF]are EEPROM page $FE. Addresses [$13FC00 – $13FFFF]are EEPROM page $FF. Addresses [$7E0000 – $7E3FFF]are FLASH PAGE $F8. Addresses [$7E4000 – $7E7FFF]are FLASH PAGE $F9. Addresses [$7E8000 – $7EBFFF]are FLASH PAGE $FA. Addresses [$7EC000 – $7EFFFF]are FLASH PAGE $FB. Addresses [$7F0000 – $7F3FFF]are FLASH PAGE $FC. Addresses [$7F4000 – $7F7FFF]are FLASH PAGE $FD. Addresses [$7F8000 – $7FBFFF]are FLASH PAGE $FE. Addresses [$7FC000 – $7FFFFF]are FLASH PAGE $FF. Flash Nonvolatile byte is mapped to Data Pattern address $7FFF0E and Flash Security byte is mapped to Data Pattern address $7FFF0F. These two can also be set using Device Configure. The two bytes are ignored during Program and Verify. To Program these two bytes the Device Configure options must be set and the Secure command must be Enabled. Once the Device has been secured the programmer can no longer access it. Please set Device Options ‘Byte order’ to: ‘MSB=0LSB=1’. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(112) |
| Part Number | MC9S12XD128VAA |
| Vcc(program) | 5 |
| Package |