Freescale Semiconductor MCF51JM32VLH(FVE4ASMR64LQFPI) QFP(64) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64LQFPI, FVE4ASMR64LQFPI | FVE4ASMR64LQFPI |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR64LQFPI, FVE4ASMR64LQFPI | FVE4ASMR64LQFPI |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the Data Pattern setup: Addresses $0000-$7FFF are FLASH. Some locations are reserved in the FLASH memory map. The following are reserved addresses:[$03FC-$03FD $0408-$040C and $040E]. These locations will be ignored during ProgramVerify. Erase command will erase entire FLASH memory map included reserved memory. During Erase factory programmed trim values at addresses $03FE and $03FF will be saved first and restored at the end. Erase will fail if the device is secured. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. The lower two bits (Bit1 and Bit0) at address $040F are security bits (SEC01:SEC00).
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | QFP(64) |
| Part Number | MCF51JM32VLH |
| Vcc(program) | 3.3 |
| Package | |
| 8-bit Bytes |