Freescale Semiconductor MCL908QT2FQ LAP(8) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM08DFNA, WSM08DFNA (repl.) | FSM08DFNA, WSM08DFNA (repl.) | WSM08DFNA |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM08DFNA, WSM08DFNA (repl.) | FSM08DFNA, WSM08DFNA (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH.The following describes the buffer setup:The addresses $F800 to $FDFF are Flash.The addresses $FFB0 to $FFBD are Flash.The address $FFBE is the FLBPR register.The addresses $FFC2 to $FFCF are Flash.The addresses $FFD0 to $FFFF are Flash and user vectors.This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the buffer or Device/Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device. Erasing the device will erase the clock trim valuesstored at location FFC0h. If these values need to be saved on blank devicesfrom the Factory disable erase before program.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | LAP(8) |
| Part Number | MCL908QT2FQ |
| Vcc(program) | 3 |
| 8-bit Bytes | |
| Package |