Freescale Semiconductor MK10DN512ZCMD12 BGA(144) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR144PBGB | FX4ASMR144PBGB, FASMR144PBGB, LX4ASMR144PBGB (repl.) | LX4ASMR144PBGB |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR144PBGB, FSMR144PBGB (obs.) | FX4ASMR144PBGB, FASMR144PBGB, FX4SMR144PBGB (obs.), FSMR144PBGB (obs.), LX4ASMR144PBGB (repl.) | LX4ASMR144PBGB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FASMR144PBGB, FSMR144PBGB (obs.) | FX4ASMR144PBGB, FASMR144PBGB, FX4SMR144PBGB (obs.), FSMR144PBGB (obs.), LX4ASMR144PBGB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The following describes the Data Pattern setup: Addresses [0x0-0x7FFFF] is Flash. Addresses [0x40C] is Flash security byte(FSEC). There are two security bits(bit 0 and bit 1) and two mass erase bits(bit 4 and bit 5) in FSEC. When mass is disabled(bit 4=0′ bit 5=’1′) and device secured the device is no longer erase. Erase must be enabled before programming otherwise Program operation will fail. The algorithm supports the 32 bit long word in Big-Endian byte order. Please make sure that the data file is also in such byte order. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | BGA(144) |
| Part Number | MK10DN512ZCMD12 |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |