Freescale Semiconductor MPC563MZP PBGA(388) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR388BGD, FASM388BGD | FASMR388BGD, FASM388BGD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR388BGD, FSM388BGD, FASMR388BGD, FASM388BGD, WASM388BGD (repl.), WASMR388BGD (repl.) | FSMR388BGD, FSM388BGD, FASMR388BGD, FASM388BGD, WASM388BGD (repl.), WASMR388BGD (repl.) | WASM388BGD, WASMR388BGD |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR388BGD, FSM388BGD, FASMR388BGD, FASM388BGD, WASM388BGD (repl.), WASMR388BGD (repl.) | FSMR388BGD, FSM388BGD, FASMR388BGD, FASM388BGD, WASM388BGD (repl.), WASMR388BGD (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Microcontroller with FLASH EEPROM.This algorithm supports both Main Flash and Shadow Flash.Erase operation will erase both Main Flash and Shadow Flash.The following describes buffer setup:Addresses [0x00000-0x7FFFF] Main Flash Module;Addresses [0x80000-0x801FF] Shadow Flash Module;The blank state of each byte is 0xFF.Unused Shadow bytes must be filled with 0xFF’s.For correct buffer loading please set the following options.Under Device/Options please select MSB=0LSB=1′(Big-Endian) for Motorola system.Under Buffer/Options please set ‘Automatic lowest address to load’ to ‘DISABLE’.Buffer/Options ‘Default buffer value’ should be set to 0xFF. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Freescale Semiconductor |
|---|---|
| Packages | PBGA(388) |
| Part Number | MPC563MZP |
| Vcc(program) | 2.6 |
| Package |