Freescale Semiconductor SGMPPC7361F8MVUR TEPBGA(416) Device

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation. Special Device Considerations: The Shadow Block Flash A contains configuration information for the device. Locations [FF_FDD8h – FF_FDDFh] These locations are factory programmed with the serial passcode ‘0xFEED_FACE_CAFE_BEEF’. Locations [FF_FDE0h – FF_FDE3h] is Censorship control word. These locations are factory programmed with 55AAh that unsecure the flash. Programming a different value will secure the device and cannot be unsecured disabling further Programmer access to the device. All serial passcode and Censorship control word in shadow Block Flash A are programmed back with factory programmed value. The Program operation will first Erase and then Program the selected array. This algorithm supports only Big Endian byte order. This algorithm supports verify command with CheckSum function from Standard Software C90FL Driver v1.0.4. The CheckSum function will perform a 32-bit sum over the specified flash memory range without carry which provides a rapid method for checking data integrity. After a successful Program + Verify operation subsequent stand alone operations may fail if the Customer Data Pattern code executes to modify the Code or Data Flash. ‘