GigaDevice Semiconductor Inc. GD32F450IGH6 BGA(176) Device
Adapters for Automated Programmers
| 8th Gen |
| FVE4ASMC201BF, FVE4ASMC201BF |
Adapters for Manual Programmers
| 8th Gen |
| FVE4ASMC201BF, FVE4ASMC201BF |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: ARM-based 32-bit MCU with Flash
| Device Type: | ARM Cortex-M4 32-bit MCU |
| Device Memory Type: | 1024K-Byte Flash |
| Algorithm Programming Method: | USART protocol |
Memory Organization:
| Memory Type |
Attributes* |
Included in DefaultRange (Y/N) | DUT Physical ByteAddress(hex) | BPWin Buffer ByteAddress(hex) |
| Flash Memory | R/W/E | Yes | 0800_0000 – 080F_FFFF | 0800_0000 – 080F_FFFF |
| Option Bytes | R/W/E | No | 1FFF_C000 – 1FFF_C00F | 1FFF_C000 – 1FFF_C00F |
| Default Algorithm Range | — | — | 0800_0000 – 080F_FFFF | 0800_0000 – 080F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Option Byte Mapping: Option Bytes can be changed under Device Config->Settings.
| Data Pattern Address | Bits [15:8] | Bits [7:0] |
| 1FFFC000h | SPC[15:8] | USER[7:2] Reserved[1:0] |
| 1FFFC002h | Reserved | Reserved |
| 1FFFC004h | Reserved | Reserved |
| 1FFFC006h | Reserved | Reserved |
| 1FFFC008h | DRP[15] DBS[14] Reserved[13:12] WP0[11:8] | WP0[7:0] |
| 1FFFC00Ah | Reserved | Reserved |
| 1FFFC00Ch | Reserved | Reserved |
| 1FFFC00Eh | Reserved | Reserved |
| 1. | Only non-reserved Option Byte bits will be checked and read. |
| 2. | The Option Bytes are not verified after the Program operation when the SPC bits are set to Security Protection Level Low or High. |
| 3. | The Erase operation will erase the entire Flash Memory including the Option Bytes. Erase will also set the device back to no security protection as long as the SPC bits were not programmed to Security Protection Level High. |
| 4. | If SPC protection is set to low (Non-AAh Non-CCh) the main Flash Memory will be totally inaccessible until erase is executed. |
| 5. | If SPC protection is set to high (CCh) device’s debug interface will be disabled. Any subsequent operation on the device will fail. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | GigaDevice Semiconductor Inc. |
|---|---|
| Packages | BGA(176) |
| Part Number | GD32F450IGH6 |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package | |
| 8-bit Bytes |