Hynix Semiconductor H26M31003GMR BGA(153) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) | FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) | FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) |
Adapters for Manual Programmers
| 8th Gen | 9th Gen | Flashstream |
| FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) | FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) | FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.), FVE4ASMC153BGJ, FVE4ASM153FBGE (obs.), FVE4ASMC169FBGH (obs.) |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | eMMC |
| Device Size: | See below |
| Algorithm Programming Mode: | SDR |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Boot Area Partition 1 | R/W/E | No | 0_0000_0000 – 0_003F_FFFF | 0_0000_0000 – 0_003F_FFFF |
| Boot Area Partition 2 | R/W/E | No | 0_0000_0000 – 0_003F_FFFF | 0_0040_0000 – 0_007F_FFFF |
| User Data Area | R/W/E | Yes | 0_0000_0000 – 0_E97F_FFFF | 0_0080_0000 – 0_E97F_FFFF |
| Default Algorithm Range | — | — | 0_0000_0000 – 0_E97F_FFFF | 0_0080_0000 – 0_E97F_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Default Device Size: | 4 GByte |
| 2. | Device size after enhancing the full user area: | 1864 MByte |
| 3. | Total number of sectors: | 7634944 |
| 4. | Write Protect Group Size: | 8 MByte |
| 5. | High Capacity Write Protect Group Size: | 8 MByte |
| 6. | MAX_ENH_SIZE_MULT: | E9h |
| 7. | Serialization Supported: | No |
| 8. | RPMB partition is not currently supported by this algorithm. | |
| 9. | General Purpose Partitions 1-4 if any are mapped directly after the boot partitions. This is followed by the rest of the User Data Area. | |
| 10. | Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. | |
| 11. | It is recommended to adjust the ‘High Device Address’ under Device->settings to match the end of the loaded data file(s). | |
| 12. | Each physical sector on the device has 512 bytes. | |
| 13. | If any partition is included in the erase operation that entire partition will be erased | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Hynix Semiconductor |
|---|---|
| Packages | BGA(153) |
| Part Number | H26M31003GMR |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| 8-bit Bytes | |
| Package |