Infineon(Siemens) ICL8105G/CM01(Custom02) SOIC(8) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This is a custom algorithm. This algorithm is to be used for parameterized devices only using an Intended Parameters file. The data file contains all intended patches to be appended (burnt) to the chip’s patchtable provided that there is enough space in the patchtable to also accommodate the new patches. The data file must be in ahex-Format each line consists of an address-data pair and is terminated with CR(0Dh) and LF (0Ah): address-word(hex):data-word(hex)CRLF The address part consists of six hex-digits while the data part uses four hex-digits only. Here is an example: 008106:CF97 008107:CF98 008108:CF99 The above example shows a data file containing three patches. It defines to patch Address 8107h to the new value CF97h Address 8108h to the new value CF98h Address 8107h to the new value CF98h The device can be frozen’ at the end of the parameterization by choosing ‘YES’ for ‘Freeze Chip after program’ under Device->Settings. Please note that the device will not accessible by this algorithm after being frozen. ‘