Infineon(Siemens) PX8240HDN QFN(48) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR48QNKB, FVE4ASMR48QNKB | FVE4ASMR48QNKB |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMR48QNKB, FVE4ASMR48QNKB | FVE4ASMR48QNKB |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Infineon Digital Power Controller |
| Device Memory Type: | Configuration Registers |
| Algorithm Programming Method: | PMBus |
| Supported Data File Format: | PSF |
| Serialization Supported: | No |
Memory Organization:
| Memory Type |
Attributes(*) |
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Configuration Registers | R/W/E | Yes | 4000 – 40FC | Determined by data file |
| Default Algorithm Range | — | — | 4000 – 40FC | Determined by data file |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Special Device Considerations:
| 1. | Each device has a limited number of writes to the non-volatile memory (NVM). After these writes are expired the device will fail the Program operation and must be replaced. Refer to the datasheet for more details. |
| 2. | The register at address 4000h must be set to 20h for programming the configuration registers. The value in the data file will be ignored. |
| 3. | Registers at addresses 4100h or higher are read-only and contain device-specific information. They are skipped for the Program and Verify operations. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 65536 |
|---|---|
| Manufacturer | Infineon(Siemens) |
| Packages | QFN(48) |
| Part Number | PX8240HDN |
| Vcc(program) | 3.3 |
| Package |