Infineon(Siemens) SAF-XC161CJ-16FF(ISP-PRO) ISP(20) Device
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSMISP-PRO | FSMISP-PRO |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMISP-PRO | FSMISP-PRO |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This is an ISP solution to be used with a WirePro test fixture.This algorithm is valid for devices starting with and including design step AC.Single-Chip Microcontroller with 128KByte Flash Memory.The 128KByte Flash Memory is mapped to Buffer addresses [00000h-1FFFFh].Make sure that the default buffer value under Buffer/Options’is set to 00h before loading data patterns.The read write protection and passwords are described under Device/Configure.It is programmed with the Device/Secure command.To program the Device/Configure options you must select the appropriate options in that menu andset ‘Secure after programming’ to ‘ENABLE’ in the Device/Options menu.Otherwise none of the options will be programmed with the Program command.If a device was previously programmed with a set of passwordswith read protection enabled the device can NOT be accessed any more.If a device was previously programmed with a set of passwordswith only write protection enableda stand alone Erase operation must be executed first with correct passwordsbefore attempting to reprogram it with a new set of passwords. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Infineon(Siemens) |
|---|---|
| Packages | ISP(20) |
| Part Number | SAF-XC161CJ-16FF |
| Set programming | Yes |
| Vcc(program) | 2.5 |
| Package |