Infineon(Siemens) SAF-XC161CS-32F40F QFP(144) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM144QF, WASM144QF (repl.) | FASM144QF, WASM144QF (repl.) | WASM144QF |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM144QF, FASM144QF, WASM144QF (repl.) | FSM144QF, FASM144QF, WASM144QF (repl.) | WASM144QF |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM144QF, FASM144QF, WASM144QF (repl.) | FSM144QF, FASM144QF, WASM144QF (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm is valid for devices starting with and including design steps AA through BB.Single-Chip Microcontroller with 256kbyte Flash Memory.The 256kbyte Flash Memory is mapped to Buffer addresses [00000h-3FFFFh].Make sure that the default buffer value is set to 00h before loading data patterns.The read write protection and passwords are described under Device Configure.It is programmed with the Device Secure command.To program the Device Configure options you must select the appropriate options in that menu andset Secure after programming’ to ‘ENABLE’.Otherwise none of the options will be programmed with the Program command.If a device was previously programmed with a set of passwordswith read protection enabled the device can NOT be accessed anymore.If a device was previously programmed with a set of passwordswith only write protection enableda stand alone Erase operation must be executed first with correct passwordsbefore attempting to reprogram it with a new set of passwords. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Infineon(Siemens) |
|---|---|
| Packages | QFP(144) |
| Part Number | SAF-XC161CS-32F40F |
| Set programming | Yes |
| Vcc(program) | 2.5 |
| Package |