Infineon(Siemens) SAF-XC164CS-16FF (Range Skip) QFP(100) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: This algorithm is valid for devices starting with and including design step AC.The range skipping feature is set under Device Configure and will allow a specific range to be excluded from Program/Verify.The Compare operation will fail for non-blank locations that have been skipped using this feature.Single-Chip Microcontroller with 128KByte Flash Memory mapped to Buffer addresses [00000h-1FFFFh].The read write protection and passwords are described under Device Configure.It is programmed with the Secure command.To program the Device Configure options you must select the appropriate options in that menu andset Secure after programming’ to ‘ENABLE’.Otherwise none of the options will be programmed with the Program command.If a device was previously programmed with a set of passwordswith read protection enabled the device can NOT be accessed any more.If a device was previously programmed with a set of passwordswith only write protection enableda stand alone Erase operation must be executed first with correct passwordsbefore attempting to reprogram it with a new set of passwords. ‘