Infineon(Siemens) SAK-TC234L-32F200 (Cached PFlash) QFP(144) Device
Adapters for Automated Programmers
| 9th Gen |
| LX2ASMR144QFPZ |
Adapters for Manual Programmers
| 9th Gen |
| LX2ASMR144QFPZ |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | AURIX 32-Bit Single-Chip Microcontroller |
| Device Size: | 2 MByte PFlash Memory + 128 Kbytes DFlash Memory |
| Algorithm Programming Method: | DAP |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| PFlash0 (Cached) | R/W/E | Yes | 8000_0000 – 801F_FFFF | 8000_0000 – 801F_FFFF | DFlash0 DF_EEPROM | R/W/E | Yes | AF00_0000 – AF01_FFFF | AF00_0000 – AF01_FFFF |
| DFlash0 DF_UCB | R/W/E | No | AF10_0000 – AF10_1BFF | AF10_0000 – AF10_1BFF |
| Default Algorithm Range | — | — | A000_0000 – AF01_FFFF | A000_0000 – AF01_FFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | This algorithm only supports UCB0-UCB6. UCB2 and UCB3 are OTP. UCB4 is factory set and is not programmable. |
| 2. | When reading a blank logical sector there may be bit errors due to unprogrammed ECC. |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2937068544 |
|---|---|
| Manufacturer | Infineon(Siemens) |
| Packages | QFP(144) |
| Part Number | SAK-TC234L-32F200 |
| Vcc(program) | 1.3 |
| Package |