+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Infineon(Siemens) TDA387400000AUMA1 QFN(38) Device

Adapters for Automated Programmers

9th Gen
FVE4ASMC37QFNA

Adapters for Manual Programmers

9th Gen
FVE4ASMC37QFNA

Adapters for Engineering Programmers


Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: 40/25A Single-voltage Synchronous Buck Regulator with PMBus
Device Memory Type: Configuration Registers
Algorithm Programming Method: PMBus
Supported Data File Format: Single image four column configuration file
Serialization Supported: No

Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Configuration Registers R/W/E Yes 0000 – 38F Determined by data file
Default Algorithm Range 0000 – 38F Determined by data file

* R/W/E: readable and rewritable if not locked. Configuration Register Mapping:

Section Register Range(hex) Enable Register(hex) and Bit
CNFG 0000 – 0003
User 0000 – 038F

Special Device Considerations:

1. Programming each section (CNFG User) can be enabled or disabledfor Program and Verify operations under Device->Settings.
2. The CNFG section is limited to five image writes.If the CNFG section is enabled and there are no more write attempts the Program operation will fail.
3. The User section is limited to 48 image writes.If the User section is enabled and there are no more write attempts the Program operation will fail.
4. The CNFG section should be programmed at least once.Otherwise the User section may not verify correctly.
5. This algorithm will only program and verify the register rangeslisted in the Configuration Register Mapping table above.The masks in the data file will determine which bits to verify.
6. Check MTP operation checks how many writes are left in the USER/CNFG sections.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

6144

Manufacturer

Infineon(Siemens)

Packages

QFN(38)

Part Number

TDA387400000AUMA1

Vcc(program)

5.5