ISSI IS22ES64G-JCLA1-IC (with DDR CRC on the fly) BGA(153) Device
Adapters for Automated Programmers
| 9th Gen |
| FVE4ASMC153BGZ, FVE4ASMC153BGJ |
Adapters for Manual Programmers
| 9th Gen |
| FVE4ASMC153BGZ, FVE4ASMC153BGJ |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | eMMC |
| Device Size: | See below |
| Algorithm Programming Mode: | DDR |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Boot Area Partition 1 | R/W/E | No | 0000000000-0000FFFFFF | 0000000000-0000FFFFFF |
| Boot Area Partition 2 | R/W/E | No | 0000000000-0000FFFFFF | 0001000000-0001FFFFFF |
| User Data Area | R/W/E | Yes | 0000000000-E8FFFFFFF | 0002000000-0E91FFFFFF |
| Default Algorithm Range | — | — | 0000000000-E8FFFFFFF | 0002000000-0E91FFFFFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked.Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.Special Device Considerations:
| 1. | Default Device Size: | 64 GByte |
| 2. | Device size after enhancing the full user area: | 29824 MByte |
| 3. | Total number of sectors: | 122159104 |
| 4. | Write Protect Group Size: | 8 MByte |
| 5. | High Capacity Write Protect Group Size: | 8 MByte |
| 6. | MAX_ENH_SIZE_MULT: | E90h |
| 7. | Serialization Supported: | No |
| 8. | RPMB partition is not currently supported by this algorithm. | |
| 9. | General Purpose Partitions 1-4 if any are mapped directly after the boot partitions. This is followed by the rest of the User Data Area. | |
| 10. | Sizes and attributes of General Purpose Partitions 1-4 can be set under Device->Settings. | |
| 11. | It is recommended to adjust the ‘High Device Address’ under Device->settings to match the end of the loaded data file(s). | |
| 12. | Each physical sector on the device has 512 bytes. | |
| 13. | If any partition is included in the erase operation that entire partition will be erased | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 62579015680 |
|---|---|
| Manufacturer | ISSI |
| Packages | BGA(153) |
| Part Number | IS22ES64G-JCLA1-IC |
| Set programming | Yes |
| Vcc(program) | 3.3 |
| Package |