+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Macronix MX25L6445EMR-12G SOIC(16) Device

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT:

Device Type: Flash Memory
Device Size: 64 Mbit
Algorithm Programming method: Standard Single/Double/Quad Mode CMOS Serial


Memory Organization:

Memory Type

Attributes(*)

Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF
OTP sector R/W-once N0 0080_0000 – 0080_01FF 0080_0000 – 0080_01FF
Default Algorithm Range 0000_0000 – 007F_FFFF 0000_0000 – 007F_FFFF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The OTP sector can be programmed and locked If this is the case this sector needs to be excluded from programming and verification ranges.
The configuration option for the factory lock is used to indicate the status of the chip.
If this option is different than the state of the chip during verification or compare it will cause an error.
Quad Enable bit(QE) feature is setup under Device Configure.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

8-bit Bytes

8389120

Manufacturer

Macronix

Packages

SOIC(16)

Part Number

MX25L6445EMR-12G

Set programming

Yes

Vcc(program)

3.3

Package