Microchip Technology dsPIC33FJ64MC506A/PT QFP(64) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Microcontroller with User Flash Code Memory (22Kx24-bit) The Code Memory is a 24 bit memory addressed from [0h-157FFh] in the Data Pattern. The Code Memory is a 24-bit value on a 32-bit boundary. This algorithm assumes Little Endian format for programming data. Please use Device->Byte Order to set Little Endian’ for this device. The Configuration bytes are located at Buffer addresses [1F00000h-1F0001Fh]. The User Unit ID bytes are located at Buffer addresses [1F00020h-1F0002Fh]. ERASE will erase the entire memory including executive memory. Configuration bytes and User Unit ID are an 8-bit value on a 32-bit boundary. The Configuration bytes and User Unit ID bytes may be set from Device Configure or from the above mentioned addresses in the Data Pattern. All unimplemented bit locations must be set to zeros. Please use help notes in Device->Configure for more information about bit identities and reserved bit locations or see Microchip specifications. Please select Secure to program these Configure Options to the device. The ‘Sum’ command generates the checksum calculation as specified by Microchip. Secured and Unsecured batches should not be mixed during standalone Verify or Secure. ‘