Microchip Technology MCP4726A5T-E/CH (Custom A01) SOT-23(6) Device
Adapters for Automated Programmers
| 9th Gen |
| WX4ASML06S (obs.), LX4ASML06SOTAC, LX4ASML06SOTAB (obs.) |
Adapters for Manual Programmers
| 9th Gen |
| WX4ASML06S (obs.), LX4ASML06SOTAC, LX4ASML06SOTAB (obs.) |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 12-bit Voltage Output DAC |
| Device Memory Type: | EEPROM |
| Algorithm Programming Method: | I2C |
| Serialization Supported: | No |
Memory Organization:
| Nonvolatile DAC Register Bits | BPWin Data Pattern Address |
| 11:8 | Address 0 bits[3:0] |
| 7:0 | Address 1 bits[7:0] |
| The 12-bit nonvolatile DAC register value is mapped to Data Pattern addresses0 through 1 as shown in the above table. |
| Address 0 bits[7:4] should be left at 0. Any other value will cause Compare to fail. |
| If the DAC register value needs to be set to all 0’s please explicitly type 0’sinto Data Pattern addresses 0 and 1. Then click Yes on the warning about a blankData Pattern when starting an operation. |
| The configuration bits (VREF[1:0] PD[1:0] Gain) can be set under Device->Settings. |
| All nonvolatile memory is reprogrammable. |
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| 8-bit Bytes | 2 |
|---|---|
| Manufacturer | Microchip Technology |
| Packages | SOT-23(6) |
| Part Number | MCP4726A5T-E/CH |
| Vcc(program) | 3 |
| Package |