Adapters for Automated Programmers
6th Gen | 7th Gen | 9th Gen |
FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTAC | FX4ASML06S (obs.), FASML06S (obs.), FX4ASML06SOTAB (obs.), FASML06SOTAB (obs.), FX4ASML06SOTAC, FASML06SOTAC | WX4ASML06S (obs.), LASML06SOTA (obs.), LX4ASML06SOTAB (obs.), LX4ASML06SOTAC |
Adapters for Manual Programmers
6th Gen | 7th Gen | 9th Gen |
FSM06S (repl.), FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTAC | FSM06S (repl.), FX4ASML06S (obs.), FASML06S (obs.), FX4ASML06SOTAB (obs.), FASML06SOTAB (obs.), FX4ASML06SOTAC, FASML06SOTAC | FSM06S, WX4ASML06S (obs.), LASML06SOTA (obs.), LX4ASML06SOTAB (obs.), LX4ASML06SOTAC |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM06S (repl.), FASML06S (obs.), FASML06SOTAB (obs.), FASML06SOTAC | FSM06S (repl.), FX4ASML06S (obs.), FASML06S (obs.), FX4ASML06SOTAB (obs.), FASML06SOTAB (obs.), FX4ASML06SOTAC, FASML06SOTAC |
Last Updated: 03/03/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
Device Type: | Microcontroller |
Device Size: | 512 bits |
Algorithm Programming Method: | Serial |
Memory Organization:
Memory Type |
Attributes(*)
|
Included in default Range (Y/N) |
DUT Physical Byte Address(hex) (if this area is selected/Activated) |
BPWin Buffer Byte Address(hex) |
[Program Memory] | [R/W/E] | [Yes] | [000-1FF] | [000-3FE] |
Default Algorithm Range | — | — | [000-1FF] | [000-3FE] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.
Special Device Considerations:
Option | Description | Default | Supported (Y/N)? |
[Watchdog Timer] | [Enable or disable watchdog timer] | [DISABLED] | [Yes] |
[MCLRE ] | [DISABLED sets RB3/MCLR pin functions as RB3 MCLR internally tied to VDD; ENABLED sets RB3/MCLR pin functions as MCLR.] | [DISABLED] | [Yes] |
[Customer Trimming INTOSC] | [If this option is set to ENABLED you must set your own Oscillator Calibration value in the next option] | [DISABLED] | [Yes] |
[RESET VECTOR VALUE] | [This option is valid only when Customer Trimming INTOSC is set to ENABLED in the above option] | [0] | [Yes] |
1. | Serialization Supported: | Yes |
2. | [Secure/Lock Erasable]: | Yes |
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Microchip Technology |
---|---|
Packages | SOIC(6) |
Part Number | PIC10F206/OTG |
Vcc(program) | 5 |
Package |