+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page

Microchip Technology PIC12C671 SOIC(8) Device

Adapters for Automated Programmers

6th Gen 7th Gen
FASMR08SHL, FASM08SHL, FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.) FASMR08SHL, FASM08SHL, FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.)

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.), WASM08SHA (obs.) (repl.), WX4ASM08SHB (obs.) (repl.) FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.), WASM08SHA (obs.) (repl.), WX4ASM08SHB (obs.) (repl.) WX4ASMR08SHA (obs.), LX4ASM08SHL, WASM08SHA (obs.), WX4ASM08SHB (obs.)

Adapters for Engineering Programmers

6th Gen 7th Gen
FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.), WASM08SHA (obs.) (repl.), WX4ASM08SHB (obs.) (repl.) FSMR08SHL, FSM08SHL, FASMR08SHL, FASM08SHL, FSMR08SHA (obs.), FSM08SHA (obs.), FSM08SHB (obs.), FSM08SG (obs.), FASMR08SHA (obs.), FASM08SHA (obs.), FASM08SHB (obs.), FASM08SG (obs.), WX4ASMR08SHA (obs.) (repl.), LX4ASM08SHL (repl.), WASM08SHA (obs.) (repl.), WX4ASM08SHB (obs.) (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Note


IMPORTANT: OTP devices will have an oscillator calibration value programmed from the manufacturer atbuffer addresses 0x7FE – 0x7FF.This algorithm will not program these addresses if they are not blank.The ID locations are addressed in the buffer at 0x4000 – 0x4007.The Configuration word is located at buffer address 0x400E(LSB) – 0x400F(MSB). Both the ID andConfiguration word may be set from the CONFIGURE menu or from the abovementioned addresses in your data file.If Code Protection is set for any value other than Off then Verify will fail after programming.

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Microchip Technology

Packages

DIP(8) SOIC(8)

Part Number

PIC12C671

Vcc(program)

5

Package