Microchip Technology PIC12CE674 DIP(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM48D300, FASM48D600 | FASM48D300, FASM48D600 |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DL, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DL, FASM48D300, FASM48D600, FSM48DB (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM48D, FSM48DH, FSM48DC, FSM48DL, FASM48D300, FASM48D600, FSM48DB (obs.) | FSM48D, FSM48DH, FSM48DC, FSM48DL, FASM48D300, FASM48D600, FSM48DB (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: OTP devices will have an oscillator calibration value programmed from the manufacturer atbuffer addresses 0xFFE – 0xFFF.This algorithm will not program these addresses if they are not blank.The ID locations are addressed in the buffer at 0x4000 – 0x4007.The Configuration word is located at buffer address 0x400E(LSB) – 0x400F(MSB). Both the ID andConfiguration word may be set from the CONFIGURE menu or from the abovementioned addresses in your data file.If Code Protection is set for any value other than Off then Verify will fail after programming.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | DIP(8) |
| Part Number | PIC12CE674 |
| Vcc(program) | 5 |
| Package |