Microchip Technology PIC12F1840-E/P DIP(8) Device

Adapters for Manual Programmers

6th Gen	7th Gen	9th Gen
FSM48D, FSM48DH, FSM48DC, FSM48DB (obs.)	FSM48D, FSM48DH, FSM48DC, FSM48DB (obs.)	LX4SM40DIPLT

Adapters for Engineering Programmers

6th Gen	7th Gen
FSM48D, FSM48DH, FSM48DC, FSM48DB (obs.)	FSM48D, FSM48DH, FSM48DC, FSM48DB (obs.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT: [Insert the device so that device pin 1 is inserted to socket pin 5.]

Device Type:	Microcontroller
Device Size:	8k Bytes Program Memory Flash with 256 Bytes Data EEPROM

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	Yes	0000_0000 – 0000_1FFF	0000_0000 – 0000_1FFF
256-Byte Data EEPROM	R/W/E	No	0001_E000 – 0001_E1FF	0001_E000 – 0001_E1FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [10000h-10007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming.Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)].IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern.Program Memory (14-bits wide) is addressed in the Data Pattern at [0000h-1FFFh].EEPROM (Data Memory) is addressed in the Data Pattern at [1E000h-1E1FFh]. EEPROM is only 8-bits wide.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Microchip Technology
Packages	DIP(8)
Part Number	PIC12F1840-E/P
Vcc(program)	5
Package