+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Microchip Technology PIC12F1840-E/SN SOIC(8) Device

Microchip Technology PIC12F1840-E/SN SOIC(8) Device

Adapters for Automated Programmers

6th Gen 7th Gen 9th Gen
FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.), WX4ASM08SN (repl.) WX4ASM08SN

Adapters for Manual Programmers

6th Gen 7th Gen 9th Gen
FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.) FX4SM08SN, FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) WX4ASM08SN

Adapters for Engineering Programmers

6th Gen 7th Gen
FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.) FX4SM08SN, FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type: Microcontroller
Device Size: 8k Bytes Program Memory Flash with 256 Bytes Data EEPROM


Memory Organization:

Memory Type

Attributes(*)

 Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Main Flash Area R/W/E Yes 0000_0000 – 0000_1FFF 0000_0000 – 0000_1FFF
256-Byte Data EEPROM R/W/E No 0001_E000 – 0001_E1FF 0001_E000 – 0001_E1FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [10000h-10007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming.Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)].IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern.Program Memory (14-bits wide) is addressed in the Data Pattern at [0000h-1FFFh].EEPROM (Data Memory) is addressed in the Data Pattern at [1E000h-1E1FFh]. EEPROM is only 8-bits wide.

‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Microchip Technology
Packages

SOIC(8)
Part Number

PIC12F1840-E/SN
Vcc(program)

5
Package