Microchip Technology PIC12F508T/SNG SOIC(8) Device

Adapters for Automated Programmers

9th Gen

WX4ASM08SN, WX4ASM08SJA, WX4ASMR08SJA

Adapters for Manual Programmers

9th Gen

WX4ASM08SN, WX4ASM08SJA, WX4ASMR08SJA

Adapters for Engineering Programmers

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Microcontroller.
Device Size:	512 Program Memory Flash Words
Algorithm Programming method:	In-Circuit Serial Programming

Memory Organization:

Memory Type	Attributes	DUT Physical Word Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Program Flash Memory	R/W/E	0-1FEh	0h-3FDh
USER IDs	R/W/E	200h-203h	400h-407h
Configuration Word	R/W/E	FFFh	1FFEh-1FFFh

* R/W/E:readable and rewritable if not locked. Program Memory is 14 bits wide. It is recommended by Microchip that the user uses only the four Least Significant Bits of each ID location. Both ID and Configuration word can be set from Device Configure or from the above mentioned addresses in your data file. Code protection can only be set by enabling the Secure Option. The Oscillator Calibration Bits are stored at the Reset Vector. To program these bits for custom trimming of the INTOSC you must do all below 3 things: 1) Enable Erase before programming’ 2) Enable ‘Customer Trimming INTOSC’ under Device Configure 3) Set your desired value in ‘RESET VECTOR VALUE’. Without doing the above 3 things the Oscillator Calibration Bits bits will be restored to the factory setting value. The Sum command generates the checksum calculation as specified by Microchip. ‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Microchip Technology
Packages	SOIC(8)
Part Number	PIC12F508T/SNG
Set programming	Yes
Vcc(program)	5
Package