Microchip Technology PIC12F519T-I/SN SOIC(8) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) | FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.), WX4ASM08SN (repl.) | WX4ASM08SN |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM08SN, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.) | FX4SM08SN, FSM08SN, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) | WX4ASM08SN |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM08SN, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.) | FX4SM08SN, FSM08SN, FSM08SR, FSM16SAT, FSM16SA, FSM14SA, FX4ASM08SN, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: User Memory is mapped to Data Pattern addresses [000h-7FFh]. Data Memory is mapped to Data Pattern addresses [800h-87Fh]. The ID locations are addressed in the Buffer at [880h-887h]. It is recommended by Microchip that the user use only the four Least Significant Bits of each ID location. The Configuration word is located at Buffer addresses [1FFEh-1FFFh]. Both ID and Configuration word can be set from Device Configure or from the above mentioned addresses in your data file. The Oscillator Calibration Bits are stored at the Reset Vector. To program these bits for custom trimming of the INTOSC you must ENABLE Erase before programming’ and also in Device Configure ENABLE ‘Customer Trimming INTOSC’ then set your desired value in ‘RESET VECTOR VALUE’. Otherwise these bits will be restored to the factory setting value. The Sum command generates the checksum calculation as specified by Microchip. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(8) |
| Part Number | PIC12F519T-I/SN |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |