Adapters for Automated Programmers
6th Gen | 7th Gen |
FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) | FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FASM08SA (obs.) |
Adapters for Manual Programmers
6th Gen | 7th Gen | 9th Gen |
FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) | FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) | WX4ASM08SN |
Adapters for Engineering Programmers
6th Gen | 7th Gen |
FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) | FSM08SN, FSM08SR, FSM08S, FSM16SAT, FSM16SA, FSM14SA, FSM16S, FASM08SN, FASM08SR, FASM16SAT, FASM16SA, FASM14SA, FSM08SA (obs.), FASM08SA (obs.), WX4ASM08SN (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: OTP devices may have an oscillator calibration value programmed by themanufacturer at device address 3FFh (buffer addresses 7FEh & 7FFh).This algorithm will not program that address if it is not blank.The ID locations are addressed in the buffer at 800h – 806h.The Configuration Word is located at buffer addresses 1FFEh & 1FFFh.Both the IDs and Configuration Word may be set from the Device ConfigureMenu or from the mentioned addresses above in your data file.Code protect can be done by setting Secure after programmingor Secure after verifying to ENABLE under Device Options.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
Manufacturer | Microchip Technology |
---|---|
Packages | SOIC(8) |
Part Number | PIC12LC509A-04E/SN |
Vcc(program) | 5 |
Package |