Microchip Technology PIC16C54 SOIC(18) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE | FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM18S, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FSM30S (obs.) | FSM18S, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FSM30S (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM18S, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FSM30S (obs.) | FSM18S, FSM28SE, FSM24SSA, FSM20S, FSM20SE, FASM18S, FASM28S, FASM28SE, FASM24SSA, FASM20S, FASM20SE, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The parts you are attempting to Program may have LPXTHS or RC suffixes in the device marking.This indicates that the part is manufactured/tested with preset Oscillator settings.If this is the case please make sure you select the same Oscillator setting at Data Pattern address 1FFEh or under Device Configure.ID locations are stored in the Data Pattern at 400h – 407h.The Configuration Word is located at Data Pattern addresses 1FFEh & 1FFFh.Both the IDs and Configuration Word may be set under Device Configure and Data Pattern.Parts are verified at High and Low voltages depending on Oscillator settings per Microchip specs. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | DIP(18) SOIC(18) |
| Part Number | PIC16C54 |
| Vcc(program) | 5 |
| Package |