Microchip Technology PIC16F1933-I/SS SOIC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA | FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA | FVE4ASMR28SSM, FVE4ASMR28SSM | FVE4ASMR28SSM |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 8th Gen | 9th Gen |
| FSM28SB, FSM28SH, FSM28SE, FSM28SS, FSM28SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FSM28SS, FSM28SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA, FSM30S (obs.), FSM28SE, FSM28SB, FSM28SH, FSM28SS, FSM28SSA, FASM28S, FASM28SE, FASM28SB, FASM28SH, FASM28SS, FASM28SSA, FSM30S (obs.) | FVE4ASMR28SSM, FVE4ASMR28SSM | FVE4ASMR28SSM |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FSM28SS, FSM28SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FSM28SS, FSM28SSA, FASM28S, FASM28SB, FASM28SH, FASM28SE, FASM28SS, FASM28SSA, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 16K X14 Words |
| Algorithm Programming Method: | Single IO |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Memory | [R/W/E] | [Yes/No] | [0000h-1FFFh] | [0000h-0FFFh] |
| EEPROM (Data Memory) | [R/W/E] | [Yes/No] | [1E000h-1E1FFh] | [F000h-F0FFh] |
| Default Algorithm Range | — | — | [0000h-1E1FFh] | [0000h-F0FFh] |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| Option | Description | Default | Supported (Y/N)? |
| [CONFIG_0_NAME] | [CONFIG_0_DESC] | [CONFIG_0_DEFAULT] | [Yes/No] |
| [CONFIG_1_NAME] | [CONFIG_1_DESC] | [CONFIG_1_DEFAULT] | [Yes/No] |
| [CONFIG_2_NAME] | [CONFIG_2_DESC] | [CONFIG_2_DEFAULT] | [Yes/No] |
| 1. | Serialization Supported: | Yes |
| 2. | [Secure/Lock Erasable]: | Yes |
| 3. | [Special file format required]: | Yes |
| 4. | [Erasing the device will erase Program Memory along with the Configuration and ID bitsbut not Calibration words!] | |
| 5. | [ It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming.] | |
| 6. | [IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern.] | |
| 7. | [Program Memory is 14-bits wide and EEPROM (Data Memory) is only 8bits wide.] | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(28) |
| Part Number | PIC16F1933-I/SS |
| Vcc(program) | 5 |
| Package |