Microchip Technology PIC16F1946T-E/PT TQFP(64) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN	FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN

Adapters for Manual Programmers

6th Gen	7th Gen
FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN	FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN

Adapters for Engineering Programmers

6th Gen	7th Gen
FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN	FSM64QAJ, FSM64PQTM, FSM64TQA, FSM64TQN, FASM64QAJ, FASM64PQTM, FASM64TQA, FASM64TQN

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Microcontroller
Device Size:	8 KWords Code Memory. 256 Bytes EEPROM.
Algorithm Programming Method:	ICSP

Memory Organization:

Memory Type	*Attributes^()**	Included in default Range (Y/N)	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Program Memory	R/W/E	Yes	0-3FFFh	0-3FFFh
EEPROM	R/W/E	Yes	0-1FFh	1E000h-1E1FFh

Default Algorithm Range	R/W/E	Y	0-1E1FFh	0-1E1FFh

* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [10000h-10007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming. Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)]. IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern. Program Memory (14-bits wide) is addressed in the Data Pattern at [000h-3FFFh]. EEPROM (Data Memory) is addressed in the Data Pattern at [1E000h-1E1FFh]. EEPROM is only 8-bits wide. The Sum command is to generate the checksum calculation as specified by Microchip.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

Manufacturer	Microchip Technology
Packages	TQFP(64)
Part Number	PIC16F1946T-E/PT
Vcc(program)	3.3
Package