Microchip Technology PIC16F630T-E/ST SOIC(14) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR28TS, FASM28TS, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FASM16T (obs.) | FASMR28TS, FASM28TS, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FASM16T (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | WASM14TSB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: The devices will have an oscillator calibration value programmed from the manufacturer atbuffer addresses 7FEh-7FFh. This algorithm will not program these addresses.The ID locations are addressed in the buffer at 4000h-4007h. It is recommended by manufacturerthat the user use only the seven Least Significant Bits of each ID location.The Configuration word is located at buffer address 400Eh(LSB)-400Fh(MSB). Both the ID andConfiguration word may be set under Device Configure menu or from the above mentioned addresses inyour data file. The bandgap bits in the Configuration word come programmed from the manufacturerand cannot be altered.User Program memory is addressed in the buffer at 000h-7FFh.EEPROM (Data Memory) is addressed in the buffer at 4200h-42FFh.To secure the device select the desired security option then enable Secure operation before programming the device.!!!!Erasing the device will erase both memories along with the Configuration word and ID bits.!!!!The Sum command generates the checksum calculation as specified by Microchip.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(14) |
| Part Number | PIC16F630T-E/ST |
| Vcc(program) | 5 |
| Package |