Microchip Technology PIC16F636-E/SL SOIC(14) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Algorithm support for this device selection is developed. Device samples are needed for QA testing and full release in BPWin.For information on how to obtain an expedited release of this device support please contact BPM Microsystems at:Inside Sales713–688-4600inside_sales@bpmmicro.comInformation on expected socket module support can be found our web page at: http://www.www.bpmmicro.com/find-your-device/**Please note that receipt of device samples and QA testing must be completed before socket module support can be validated. Erasing the device will erase both memories along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [4000h-4007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID location. The Configuration word is located at Data Pattern addresses [400Eh(LSB)-400Fh(MSB)]. Both the ID and Configuration may be set under Device Configure or from the above mentioned addresses in your data file. User Program memory is addressed in the Data Pattern at [000h-FFFh]. EEPROM (Data Memory) is addressed in the Data Pattern at [4200h-43FFh]. To secure the device select the desired security option then enable Secure operation before programming the device. The Device Sum command is to generate the checksum calculation as specified by Microchip.