Microchip Technology PIC16F636-I/ML QFN(16) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC16QFNJ (obs.), FVE4ASMC16QFNJ (obs.) | FVE4ASMC16QFNJ (obs.) |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC16QFNJ (obs.), FVE4ASMC16QFNJ (obs.) | FVE4ASMC16QFNJ (obs.) |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: Erasing the device will erase both memories along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [4000h-4007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID location. The Configuration word is located at Data Pattern addresses [400Eh(LSB)-400Fh(MSB)]. Both the ID and Configuration may be set under Device Configure or from the above mentioned addresses in your data file. User Program memory is addressed in the Data Pattern at [000h-FFFh]. EEPROM (Data Memory) is addressed in the Data Pattern at [4200h-43FFh]. To secure the device select the desired security option then enable Secure operation before programming the device. The Device Sum command is to generate the checksum calculation as specified by Microchip.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | QFN(16) |
| Part Number | PIC16F636-I/ML |
| Set programming | Yes |
| Vcc(program) | 5 |
| Package |