Microchip Technology PIC16F676-I/SL SOIC(14) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: Erasing the device will erase both memories along with the Configuration and ID bits but not Calibration words(Data Pattern address: 7FEh-7FFh)! The Calibration words are skipped during all device operations. The bandgap bits in the Configuration word come programmed from the manufacturer and cannot be altered. The ID locations are addressed in the Data Pattern at [4000h-4007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID location. The Configuration word is located at Data Pattern addresses [400Eh(LSB)-400Fh(MSB)]. Both the ID and Configuration may be set under Device Configure or from the above mentioned addresses in your data file. User Program memory is addressed in the Data Pattern at [000h-7FFh]. EEPROM (Data Memory) is addressed in the Data Pattern at [4200h-42FFh]. To secure the device select the desired security option then enable Secure operation before programming the device.