Microchip Technology PIC16F688T-E/ST (Special Power Cycle) TSSOP(14) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASMR28TS, FASM28TS, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FASM16T (obs.) | FASMR28TS, FASM28TS, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FASM16T (obs.) |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | WASM14TSB |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) | FSMR28TS, FSM28TS, FASMR28TS, FASM28TS, FSM14TSB, FSMR20TSC, FSM24TS, FSM20TSC, FASM14TSB, FASMR20TSC, FASM24TS, FASM20TSC, FSM16T (obs.), FASM16T (obs.), WASM14TSB (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: This algorithm executes a special power cycle once at the end of all operations. The device ispowered on for three seconds and then powered down.Erasing the device will erase both memories along with the Configuration and ID bitsbut not Calibration words!The Calibration words are skipped during all device operations.The ID locations are addressed in the Buffer at [4000h-4007h].It is recommended by manufacturerthat the user use only the seven Least Significant Bits of each ID location.The Configuration word is located at Buffer addresses [400Eh(LSB)-400Fh(MSB)].Both the ID and Configuration may be set under Device Configureor from the above mentioned addresses in your data file.User Program memory is addressed in the Buffer at [000h-1FFFh].EEPROM (Data Memory) is addressed in the Buffer at [4200h-43FFh].To secure the device select the desired security optionthen enable Secure operation before programming the device.The Device Sum command is to generate the checksum calculationas specified by Microchip.
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | TSSOP(14) |
| Part Number | PIC16F688T-E/ST |
| Vcc(program) | 5 |
| Package |