Microchip Technology PIC16LF1508T-I/ML MLF(20) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM20MLFD | FX4ASM20MLFD, FASM20MLFD |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM20MLFD, FASM20MLFD | FX4SM20MLFD, FSM20MLFD, FX4ASM20MLFD, FASM20MLFD, LX4ASM20MLFD (repl.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM20MLFD, FASM20MLFD | FX4SM20MLFD, FSM20MLFD, FX4ASM20MLFD, FASM20MLFD, LX4ASM20MLFD (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | 8-Bit Microcontroller |
| Device Size: | 4096 words Program Flash Memory |
| Algorithm Programming Method: | In-Circuit Serial Programming (ICSP) interface |
| Serialization Supported: | Yes |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Word Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Program Flash Memory | R/W/E | Yes | 0000h – 0FFFh | 0000h -0FFFh |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under ‘Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:
| 1. | Data pattern requires a 14-bit format for Program Flash memory. | |
| 2. | Erasing the device will erase Program Memory and Data Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. | |
| 3. | The ID locations are addressed in the Data Pattern at [10000h-10007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming. | |
| 4. | Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)]. IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern. | |
‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | MLF(20) |
| Part Number | PIC16LF1508T-I/ML |
| Vcc(program) | 3.3 |
| Package |