Microchip Technology PIC18F4620T-E/PT (Gang) TQFP(44) Device

Adapters for Automated Programmers

Adapters for Manual Programmers

Adapters for Engineering Programmers

Last Updated: 05/18/2023

IMPORTANT: The 64Kbytes of Code Memory(Flash area) are addressed from [0h-FFFFh].The ID locations(8 bytes) are addressed in the Buffer at [200000h-200007h].The Configuration bytes are located at Buffer addresses [300001h-30000Dh].The 1024 bytes of Data Memory(EEPROM area) are addressed from [F00000h-F003FFh].The Configuration word may be set from the CONFIGURE menu or from the abovementioned addresses in the data file. All reserved bit locationsmust be set to zeros. The BBSIZ1 and BBSIZ0 bits can not be changed once anyof the following code-protect bits are enabled: CPB or CP0 WRTB or WRT0EBTRB or EBTR0. Please use help notes under Device Configure to viewmore information about bit identities and reserved bit locations or see Microchip specs.To program the options in the Device Configure you must select the appropriate optionsAND Secure must be enabled . Otherwise none of the options will be programmed.The Sum command generates the checksum calculation as specified by Microchip.Stand alone verify and compare commands may fail if certain config options havebeen set per Microchip.