Microchip Technology PIC18F6585T-I/L PLCC(68) Device

Adapters for Automated Programmers

6th Gen	7th Gen
FASM68PM	FASM68PM

Adapters for Manual Programmers

6th Gen	7th Gen
FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.)	FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.)

Adapters for Engineering Programmers

6th Gen	7th Gen
FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.)	FSM68PMA, FSM68P, FSM68PA, FSM84UP, FASM68PM, FSM68PW (obs.), FSM68PM (obs.), FSM84AH (obs.), FSM84UPB (obs.), FSM84AHA (obs.)

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type:	Flash Microcontroller
Device Size:	48K bytes

Memory Organization:

Memory Type	*Attributes^()**	DUT Physical Byte Address(hex)(if this area is selected/Activated)	BPWin Buffer Byte Address(hex)
Main Flash Area	R/W/E	0000_0000 – 0000_BFFF	0000_0000 – 0000_BFFF
Data EEPROM	R/W/E	00F0_0000 – 00F0_03FF	00F0_0000 – 00F0_03FF

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

The ID locations(8 bytes) are addressed in the Buffer at [200000h-200007h]. The Configuration bytes are located at Buffer addresses [300001h-30000Dh]. The Configuration word may be set from the CONFIGURE menu or from the above mentioned addresses in the data file.All reserved bit locations must be set to zeros. Please use help notes under Device Configure to view more information about bit identities and reserved bit locations or see Microchip specs. To program the options in the Device Configure you must select the appropriate options AND Secure must be enabled. Otherwise none of the options will be programmed.The Sum command generates the checksum calculation as specified by Microchip.

‘



BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

More Info

Additional information

8-bit Bytes	49152
Manufacturer	Microchip Technology
Packages	PLCC(68)
Part Number	PIC18F6585T-I/L
Vcc(program)	5
Package