Microchip Technology PIC24F32KA302-I/ML QFN(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMC28MLFY | FX4ASMC28MLFY, FASMC28MLFY, LX4ASMC28MLFY (repl.) | LX4ASMC28MLFY |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSMC28MLFY, FASMC28MLFY | FX4SMC28MLFY, FSMC28MLFY, FX4ASMC28MLFY, FASMC28MLFY, LX4ASMC28MLFY (repl.) | LX4ASMC28MLFY |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSMC28MLFY, FASMC28MLFY | FX4SMC28MLFY, FSMC28MLFY, FX4ASMC28MLFY, FASMC28MLFY, LX4ASMC28MLFY (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 32Kx24-bit |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Word Address(hex) |
| Program Flash | R/W/E | Yes | 00000-0AFFF | 00000-057FF |
| EEPROM | R/W/E | Yes | FFFC00-FFFFFF | 7FFE00-7FFFFF |
| Configuration Register | R/W/E | Yes | 1F00004-1F00020 | F80000-F80010 |
| Default Algorithm Range | — | — | 00000-0AFFF | 00000-057FF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.1. The Program Flash Memory is a 24 bit memory addressed from [0-AFFFh] in the Data Pattern.2. The Program Flash Memory is a 24-bit value on a 32-bit boundary.3. This algorithm assumes Little Endian format for programming data.4. Configuration bytes are an 8-bit value on a 32-bit boundary.5. Please set ‘Little Endian’ under Device->Byte Order.6. The Configuration bytes may be set from Device Configure or from the above mentioned addresses in the Data Pattern. All unimplemented bit locations must be set to zeros. Please use help notes in Device->Configure for more information about bit identities and reserved bit locations or see Microchip specifications.7. The ‘Sum’ command generates the checksum calculation as specified by Microchip. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | QFN(28) |
| Part Number | PIC24F32KA302-I/ML |
| Vcc(program) | 3.3 |
| Package |