+1 (713) 688-4600 | Sales Toll-Free: (855) SELL BPM | 24/7 Service: +1 (832) 617-5702 info@bpmmicro.com
Select Page
Microchip Technology PIC24FJ32GB002-E/SS SSOP(28) Device

Microchip Technology PIC24FJ32GB002-E/SS SSOP(28) Device

Adapters for Automated Programmers

6th Gen 7th Gen
FASM28SS, FASM28SSA FASM28SS, FASM28SSA

Adapters for Manual Programmers

6th Gen 7th Gen
FSM28SS, FSM28SSA, FASM28SS, FASM28SSA FSM28SS, FSM28SSA, FASM28SS, FASM28SSA

Adapters for Engineering Programmers

6th Gen 7th Gen
FSM28SS, FSM28SSA, FASM28SS, FASM28SSA FSM28SS, FSM28SSA, FASM28SS, FASM28SSA

Last Updated: 05/18/2023

If the device is not yet supported by your BPM programmer (Generation), request Device Support

Request Support Options

Note

IMPORTANT:

Device Type: Microcontroller with User Flash Code Memory (11Kx24-bit)

Device Size: 32 KB


Memory Organization:

* R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection. Special Device Considerations:

Memory Type

Attributes(*)

 Included in default Range (Y/N) DUT Physical Byte Address(hex)(if this area is selected/Activated) BPWin Buffer Byte Address(hex)
Code Memory R/W/E Yes 0000_0000-0000_AFFF 0000_0000-0000_AFFF
Default Algorithm Range — — 0000_0000-0000_AFFF 0000_0000-0000_AFFF
The Code Memory is a 24 bit memory addressed from [0h-AFFFh] in Data Pattern. The four configuration words(4×24-bit) are addressed in the Data Pattern at [AFF0h-AFFFh]. The Code Memory(including configuration words) is a 24-bit value on a 32-bit boundary. This algorithm assumes Little Endian format for programming data.Please set ‘Little Endian’ under Device->Byte Order.ERASE will erase the entire memory including executive memory.The Configuration words may be set from Device Configure or from the above mentioned addresses in the Data Pattern. Please use help notes in the Device Configure to view more information about bit identities and reserved bit locations or see Microchip specifications.The ‘Sum’ command generates the checksum calculation as specified by Microchip.

‘

BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.

Additional information

Manufacturer

Microchip Technology
Packages

SSOP(28)
Part Number

PIC24FJ32GB002-E/SS
Vcc(program)

3.3
Package