Microchip Technology PIC24FJ512GA606 QFP(64) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FASMR64QPT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | LASMR64QPT |
Adapters for Manual Programmers
| 6th Gen | 7th Gen | 9th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.), FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQT, FSM64PQTX, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQT, FASM64PQTX, FASM64PQTA, LASMR64QPT (repl.) | LASMR64QPT |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) | FSM64PQTA, FASMR64QPT, FSM64QAJ, FSM64PQTM, FSM64PQTF, FSM64PQTX, FSM64PQT, FASM64QAJ, FASM64PQTM, FASM64PQTF, FASM64PQTX, FASM64PQT, FASM64PQTA, LASMR64QPT (repl.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 512 Mbyte |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| Flash Memory | R/W/E | Yes | 00000-55EFF | 00000-55EFF |
| Default Algorithm Range | — | — | 00000-55EFF | 00000-55EFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.The Code Memory is a 24 bit memory addressed from [0-55EFF] in the Buffer.The Code Memory(including configuration words) is a 24-bit value on a 32-bit boundary.This algorithm assumes Little Endian format for programming data.ERASE will erase the entire memory including executive memory.Dual Partition Flash mode is not supported. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | QFP(64) |
| Part Number | PIC24FJ512GA606 |
| Vcc(program) | 3.3 |
| Package |