Microchip Technology PIC24FJ64GA002T-E/SO SOIC(28) Device
Adapters for Automated Programmers
| 6th Gen | 7th Gen |
| FASM28S, FASM28SB, FASM28SH, FASM28SE | FASM28S, FASM28SB, FASM28SH, FASM28SE |
Adapters for Manual Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.), FSM28SE, FSM28SB, FSM28SH, FASM28S, FASM28SE, FASM28SB, FASM28SH, FSM30S (obs.) |
Adapters for Engineering Programmers
| 6th Gen | 7th Gen |
| FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) | FSM28SB, FSM28SH, FSM28SE, FASM28S, FASM28SB, FASM28SH, FASM28SE, FSM30S (obs.) |
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT:
| Device Type: | Microcontroller |
| Device Size: | 22Kx24-bit |
| Algorithm Programming Method: | Serial |
Memory Organization:
| Memory Type |
Attributes(*)
|
Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) |
| User Flash | R/W/E | Yes | 00000-0ABFF | 00000-0ABFF |
| Default Algorithm Range | — | — | 00000-0ABFF | 00000-0ABFF |
* R:Read only W: One time programmable (OTP) R/W: readable and one time programmable (OTP) R/W/E: readable and rewritable if not locked. Any configurations listed under Device-Specific’ in the menu item Device-> Settings will be written to the DUT during ‘Program’ operation regardless of memory range selection.The Code Memory is a 24 bit memory addressed from [0-157FFh] in the Buffer.The two configuration words(2×24-bit) are addressed in the buffer at [157F8h-157FFh].The Code Memory(including configuration words) is a 24-bit value on a 32-bit boundary.This algorithm assumes Little Endian format for programming data.Please set ‘Little Endian’ under Device->Byte Order.ERASE will erase the entire memory including executive memory.The Configuration words may be set from Device Configure or from the abovementioned addresses in the Buffer. Please use help notes in the Device Configure to viewmore information about bit identities and reserved bit locations or see Microchip specifications.The ‘Sum’ command generates the checksum calculation as specified by Microchip. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | SOIC(28) |
| Part Number | PIC24FJ64GA002T-E/SO |
| Vcc(program) | 3.3 |
| Package |