Microchip Technology PIC32MX250F128DT-40V/ML QFN(44) Device
Adapters for Automated Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC44QFNZ, FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNY (obs.), FVE4ASMC44QFNY (obs.), FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNZ | FVE4ASMC44QFNY (obs.), LX4ASMC44QFNW, FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNZ |
Adapters for Manual Programmers
| 8th Gen | 9th Gen |
| FVE4ASMC44QFNZ, FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNY (obs.), FVE4ASMC44QFNY (obs.), FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNZ | FVE4ASMC44QFNY (obs.), LX4ASMC44QFNW, FVE4ASMC44QFNW (obs.), FVE4ASMC44QFNZ |
Adapters for Engineering Programmers
Last Updated: 05/18/2023
If the device is not yet supported by your BPM programmer (Generation), request Device Support
Note
IMPORTANT: 32-bit Microcontroller with 128KB Flash. The Flash Memory is mapped from [1D000000h-1D01FFFFh] in the Data Pattern The Boot Flash is mapped from [1FC00000h-1FC00BEFh] in the Data Patern The four configuration words (4×32-bit) are mapped in the Data Patern at [1FC00BF0h-1FC00BFFh] If JTAGEN bit in Flash Configuration Word 0 is set to 0 the device can no longer be accessible. In order to reprogram the device the job must satisfy below configuration settings: 1) The JTAGEN and DEBUG<1> bit in Flash Configuration Word 0 is set to 1. 2) The IESO bit in Flash Configuration Word 1 is set to 1. Please set Little Endian’ under Device->Byte Order. Algorithm uses JTAG 4-wrie with PE mode to program the device. ‘
BPM does not sell programmable devices, nor do we program devices directly. BPM makes programmers and accessories to make programming in-house fast, easy, and profitable.
Additional information
| Manufacturer | Microchip Technology |
|---|---|
| Packages | QFN(44) |
| Part Number | PIC32MX250F128DT-40V/ML |
| Vcc(program) | 3.3 |
| Package |